Seagate Wireless Plus

I love my iPad. It has lots of stuff on it — apps, photos, books, music videos, … … So much, in fact, that there’s not a lot of spare space (next upgrade will be the 128 GB model) for movies and TV shows that I’d like to watch when I go away. I just got the HD version of The Hobbit from iTunes: it’s 6 GB and wouldn’t fit on the iPad without some drastic surgery.

A possible solution seemed to be the Seagate Wireless Plus. It has a 1 TB disk and generates its own wireless network to which the iPad (or any other suitable device—Android and Kindle have their own apps) can be connected. Apparently, up to 3 separate, simultaneous broadcasts are possible. It certainly worked with my iPad and iPad Mini with no obvious degradation of performance.

Conclusion

I haven’t used the Wireplus+ in the wild yet, but after a couple of days messing about, the bottom line is that this seems to be a pretty nifty gadget. When you switch the thing on, it broadcasts a wireless network (the range is supposed to be up to 150 feet/45m). Select this network in the iDevice settings, start the Seagate Media app and you’re away—ready to play whatever content you have loaded. Content that is not DRM-protected plays inside the app, films/videos from iTunes play in the Safari browser, provided the iPad is authorised on the relevant iTunes account. The Wireless+ is only 254 gms plus cable and charger.

Set-up

Set-up of the Wireless+ was pretty straightforward:

  1. Turn on to start the wireless network.
  2. Download the Seagate Media app.
  3. Connect to the Seagate wireless network in IOS settings.
  4. Run the app and configure the network. At this point, you can change the network SSID and set a password. You can also now specify your normal wireless network (inside the Seagate app), so you have normal Internet connectivity when using the Wireless+.
  5. A final step for Mac users, is to plug the drive into USB port (USB 3 downwards-compatible with USB 2), and run an installer that is supplied on the drive.

Operation

To use the Wireless+, just turn it on to start the network. A blue LED flashes while the network initialises; it takes several seconds for the blue light to become solid. My experience has been that this time can vary quite a bit.

You must change the IOS settings to choose the Seagate network each time. Possibly, the iPad might connect automatically, if there are no other networks around.

Run the app and play content. The app has display options to change how the available files are displayed. Different media types can be filtered, and can be shown by folders. After loading a few dozen TV episodes and a few films, this seems to be an easier way to find what you are looking for as the media display is a bit overwhelming.

The Wireless+ has a battery; 10 hours usage is claimed. I haven’t checked this, but this means you could have your own film library on long-haul flights.

Loading Content

The simplest and quickest way to do this is plug the drive into your computer and copy files to it. I found that for iTunes stuff, it was best to use copy rather than drag-and-drop, so as not to risk messing the iTunes library. The wireless network does not broadcast when plugged into a USB port.

The Wireless+ does appear as a shared device in Finder on my iMac. It’s possible to copy content, but I wouldn’t advise it: sloooow.

I discovered that it is possible to manage the Wireless+ content using FileBrowser on the iPad. This makes it easier to reorganise your content, if you choose to. This also means you can copy from other sources, such as Dropbox. It does work, but it’s not for regular use—slower than paint drying.

Problems

Files don’t always copy correctly

More than once, I have copied a group of files from my iMac via USB 3. Most files transfer correctly, but occasionally there’s a problem, which isn’t indicated during the copy process. What happens is that the Seagate Media app subsequently refuses to play a video file with an error message about incompatible format. It does appear that these faulty files can be identified because the video icon is generic, whereas normal files have in icon that displays the movie or TV episode information. The solution is to re-copy the files, but I’m not absolutely certain that this always cures the problem.

Quick Start instructions a little too quick

Initial set-up is straightforward, but after I got to the Mac-specific bits, things got a little flakey. I’m not entirely certain what went wrong or how I managed to fix things. At one point, I had to do a paperclip reset of the Wireless+. I’ve since discovered there’s online manual. Since it’s a PDF, it would have been sensible to include it on the disk. Anyway, as I’ve said, every things seems to be OK now.

Comments

  1. Aris St James says:

    Just purchased Seagate Wireless Plus. Your has been more helpful than Seagate’s PDF manual. Thanks for the tips.

  2. I have just purchased the Wireless + and copied a movie onto it but it tells me it’s incompatible for the devise, am I best to shrink the movies then copy across

Trackbacks

  1. […] wrote about the Seagate Wireless Plus just over a year ago. Since then I’ve used it occasionally, and on the whole, it has performed well. Problems of […]

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: